SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL
DEFINITION
V
Volts
Direct current
A danger, warning,
or caution. It means
'Attention! Your safety
is involved.'
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING
• Do not rely on the tool's insulation against electric shock. To reduce the risk of
electrocution, never operate the tool in the vicinity of any wires or cables which may
carry electric current.
WARNING
• Wear appropriate personal hearing protection during use. Under some conditions and
durations of use, noise from this product may contribute to hearing loss.
• Avoid Dangerous Environments – Don't use appliances in damp or wet locations.
• Keep Children Away - All visitors should be kept at a distance away from work area.
• Dress Properly - Do not wear loose clothing or jewelry. They can be caught in moving
parts. Use of rubber gloves and substantial footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.
• Use Safety Glasses. Always use face or dust mask if operation is dusty.
• Use Right Appliance - Do not use appliance for any job except that for which it is intended.
• Don't Force Appliance - It will do the job better and with less likelihood of a risk of injury at
the rate for which it was designed.
• Don't Overreach - Keep proper footing and balance at all times.
• Stay Alert - Watch what you are doing. Use common sense. Do not operate the edger when
you are tired or while under the influence of alcohol or drugs.
• Keep guards in place and in working order.
• Keep blades sharp. Replace dull or worn blade; do not attempt to sharpen.
• Keep hands and feet away from the cutting area.
• Never stand or have any part of your body in line with the path of the edger blade.
• Store Idle Appliances Indoors - When not in use, appliances should be stored indoors in a
dry and high or locked-up place with the battery pack removed and out of reach of children.
• Maintain Appliance with Care - Keep cutting edge sharp and clean for best performance
and to reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Keep handles dry, clean, and free from oil and grease.
SYMBOL
DEFINITION
n
No-load speed
0
RPM
Revolutions per Minute
To reduce the risk of injury, user
must read instruction manual.
5