The Timer And Time Display - Setting The Television To Turn On And Off, Time Display; Panel Lock - Disabling The Buttons On The Television; Stereo And Bilingual Transmissions - Stereo Or Dual Language Broadcasts - Toshiba 32ZP46 Serie Manual Del Propietário

The timer, time display, panel lock,
blue screen and stereo/bilingual transmissions
The Timer
The television can be set to turn itself ON or OFF after a
certain time.
Select Timer from the top menu bar.
1
Timer
Off timer
On timer
0 – 9 : To set
EXIT : To exit
Press Q to select On or Off timer. Use the
2
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30.
If setting the Off timer, press EXIT to finish. If
3
setting the On timer, enter the programme
position number required, then press
the television into Standby. The GREEN On timer
indicator on the front of the television will now
be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the television
can be switched on at any time by pressing
The Green On timer indicator will remain on until
the set time period as passed when the television
will go to the chosen channel. This feature can
help to avoid missing favourite programmes.
To cancel the On timer, enter zero in each
4
position including the programme position.
The Time Display
The time display facility allows the current time to be seen
on the television screen.
Press / whilst watching a normal television
8 9
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
All manuals and user guides at all-guides.com
00:00
01:30 P 2
i
to put
i
.
Panel lock disables the buttons on the front of the
television. All buttons on the remote control can still
From the Feature menu select Panel lock and
1
choose ON or OFF using S or R .
Feature menu
AV connection
Picture size/position
†
Surround set up
Panel lock
Automatic format
Blue screen
Geomagnetic
*
When Panel lock is ON, a reminder will appear when
any of the front panel buttons are pressed. Once the
television has been switched off it can ONLY be brought
out of standby using the remote control.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Stereo... Press
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O
† ZP48 models only
* 36" models only
16
Panel lock
be used.
Mono will appear.
to select Stereo or Mono.
I/II
to select Dual 1, Dual 2 or Mono.
I/II
ON
ON
ON