Toshiba 32ZP46 Serie Manual Del Propietário página 23

Q
Q
Why are there problems with teletext?
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check the aerial. Go to the main index page of the teletext
service and look for the User Guide. This will explain the
basic operation of teletext in some detail. If further
information is needed on how to use text see the
teletext section.
Q
Why are there no teletext sub-pages?
A
There are none broadcast or they have not yet
loaded. Press the (
X B
(See teletext section).
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a SCART lead and play.
Select the Set up menu.
Set up
Language
Colour
Teletext
EXIT : To exit
Set the Colour to AUTO and exit.
1
Go to the Picture menu and adjust the tint.
2
Q
Why is there no sound from external
equipment?
A
Check the SCART lead connections. Check the AV
Connections. Make sure Digital Input has not
been selected on ZP48 models.
Q
Why is there sound but no picture from external
equipment?
A
Check the SCART lead connections.
All manuals and user guides at all-guides.com
uestions
and
) buttton to access.
ENGLISH
AUTO
A
nswers
Q
Why is there no Dolby Surround?
(ZP48 models only)
A
If surround sound effects are unavailable from the
rear speakers whilst playing a Dolby Surround
video tape, check that the VCR is a stereo unit and is
connected by a SCART lead. Then check the Surround
set up in the Feature menu.
Q
Why is there no Dolby Digital?
(ZP48 models only)
A
If full Dolby Digital is unavailable, check that the
Rear speaker option in Surround set up is set to
YES, that the equipment is connected by optical or coaxial
cable as well as through a SCART socket or
COMPONENT VIDEO INPUT. Also check that EXT 2 or
EXT 4 is selected in AV connections.
If external front speakers are connected the External
speaker switch must be set to EXT to get the full benefit of
Dolby Digital. If the switch is set to INT the external
speakers will not function. Turn the television off
before changing the position of the switch.
Q
Why is there no sound from the external front
speakers? (ZP48 models only)
A
Check that the External speaker switch has been
set to EXT.
Q
Why is there no sound from the external rear
speakers? (ZP48 models only)
A
Check that the Rear speaker option in Surround
set up is set to YES and the Surround out option
is set to SP OUT.
Q
Why is there no sound from the connected
external amplifier? (ZP48 models only)
A
Check that the Rear speaker option in Surround
set up is set to YES and the Surround out option
is set to EXTERNAL.
23
continued