Bellman & Symfon CARQ Manual Del Usuario página 79

Technical information
Batteries 2 x 1.5 V AA (LR6) lithium or alkaline batteries.
Power consumption Active < 70 mA, Idle position < 15 μA
Operating time Alkaline ~ 5 years, Lithium ~ 10 years
Activation
Via the test buttons, the internal or external microphone, via
electromagnetic detection or the external trigger input
Radio frequency 314.91 MHz, 433.92 MHz and 868.30 MHz depending on region
Coverage 50 – 250m (55 - 273yd) depending on radio frequency. Coverage
is reduced by walls, large objects and other radio transmitters.
Number of radio keys
64 as standard. Up to 256 with optional software.
Accessories BE9199 External microphone 2.5m (2.7yd), BE9200 External
microphone 0.75m (0.8yd).
Additional information
Operating temperature 0° – 35° C, 32° – 95° F
Transport and storage temp. –10° – 50° C, 14° – 122° F
Relative humidity 15% – 90% (non condensing)
Maintenance and cleaning Maintenance free. Clean with a dry cloth. Don't use household
cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives.
Warranty and service If the product appears to be damaged or doesn't function properly,
follow the advice in this booklet. If it still doesn't function properly,
contact your retailer for info about obtaining warranty service.
151
FCC compliance statement
is no guarantee that interference will
not occur in a particular installation.
This device complies with Part 15 of
If this equipment does cause harmful
the FCC Rules. Operation is subject to
interference to radio or television
the following two conditions: (1) this
reception, which can be determined
device may not cause harmful interfer-
by turning the equipment off and on,
ence, and (2) this device must accept
the user is encouraged to try to cor-
any interference received, including
rect the interference by one or more of
interference that may cause undesired
the following measures:
operation.
• Reorient or relocate the receiving
FCC ID: WMSBETXDR
antenna.
Warning: Changes or modifications • Increase the separation between the
to this unit not expressly approved by equipment and receiver.
the party responsible for compliance • Connect the equipment into an
could void the user's authority to oper- outlet on a circuit different from that
ate the equipment.
to which the receiver is connected.
• Consult the dealer or an experienced
Note: This equipment has been
radio/TV technician for help.
tested and found to comply with
the limits for a Class B digital device,
For a complete Declaration of Conformi-
pursuant to part 15 of the FCC
ty please contact the Bellman & Symfon
Rules. These limits are designed to European office.
provide reasonable protection against
Industry Canada statement
harmful interference in a residential
installation. This equipment generates
This device contains licence-exempt
uses and can radiate radio frequency transmitter(s)/receiver(s) that comply
energy and, if not installed and used with Innovation, Science and Econo-
in accordance with the instructions, mic Development Canada's licence-
may cause harmful interference to exempt RSS(s). Operation is subject to
radio communications. However, there the following two conditions:
(1) This device may not cause interfe-
rence. (2) This device must accept any
interference, including interference
that may cause undesired operation
of the device.
L' émetteur/récepteur exempt de
licence contenu dans le présent
appareil est conforme aux CNR d'Inno-
vation, Sciences et Développement
économique Canada applicables aux
appareils radio exempts de licence.
L' exploitation est autorisée aux deux
conditions suivantes :
(1) L' appareil ne doit pas produire de
brouillage; (2) L' appareil doit accepter
tout brouillage radioélectrique
subi, même si le brouillage est
susceptible d' en compromettre le
fonctionnement.
This Class B digital a paratus complies
with the Canadian ICES-003.
IC: 6693A-BETX4
Zusätzliche Information
Nur Innen verwenden. Wartungsfrei.
Reinigung mit einem nur leicht
feuchten Tuch.
HMV 16.99.09.0045
152