Using Of Videophone; Additional Settings; Selection Of The Ring Tone; Settings Of The Video Surveillance Mode - Extel MEMO Instrucciones De Uso E Instalación

b. Using of videophone
• A call from the outdoor station button triggers the ringer and causes the monitor to light up for about thirty
seconds. Once the visitor has been identified, press on the
N.B. : Pressing this key just once is enough to establish communication with the outdoor station.
• Once communication is over, either wait for the delay time (about 1 minute 30) or turn the monitor off using
the key.
• To resume communication and bring the image back, press twice on the
• The catch or mechanism is activated using the
(Caution : the control is only valid if the screen is turned on)
• At any time you can launch a A/V record of 10 seconds, of your conversation by pressing the key
• It is possible to supervise outside (without conversation) by pressing once the key
viewing time is adjustable (next chapter b.)
7

ADDITIONAL SETTINGS

a. Selection of the ring tone
• Enter in "menu" by pressing twice the key
• Select "outside ring tone" and scroll through the ring tones with
ted for the next call.).
• Select "exit" with the keys + / - and validate with
b. Settings of the video surveillance mode
• When you use your video door phone in video surveillance mode, the image will be displayed for one minute
(factory setting) It is possible to modify this time out from 30 seconds to 10 minutes as follows:
• Enter the "menu" by pressing twice the key
• Select "duration of surveillance" with the keys + / -. Select the desired time with the keys
• Select exit with the keys + / - and validate with
c. Video recording of the visitors mode
• This function (originally enabled) allows recording an A/V sequence of 10 seconds when a visitor calls from the
roadside panel.
• Enter in "menu" by pressing twice the key
• Select the icon "setting", validate with
• Select "automatic record", choose ON or OFF with the key
• Select "exit" with the keys + / - and validate with
To view the ideas refer to the chapter f « Memory Mode and SD card».
d. Restoring default parameters
• Enter in "menu" by pressing twice the key
• Select "advanced setting" validate with
• Enter the password "2008" with the keys + / - to increment and
• Select "information" validate with
• Select "exit" and validate to exit the menu.
e. Settings of the monitor
• Turn on the screen with the key
• Use the keys + / - to set or select, and
8GB
All manuals and user guides at all-guides.com
key.
and select the icon "setting" validate with
to exit the menu.
and select the icon "setting" validate with
pour sortir du menu.
to exit the menu.
and select the icon "setting", validate with
on "Restoring default setting" validate with
and press
to validate and go to the next menu or
CFI EXTEL MEMO - 09/2010 - V1
key to establish communication.
key.
. The duration of the
(The last ring tone listened will be selec-
to go to the next digit, validate with
to exit.
and