Descargar Imprimir esta página

Bosch Sensixx x DA70 Instrucciones De Uso página 18

Ocultar thumbs Ver también para Sensixx x DA70:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
6 Release the "clean" button, and gently shake
the iron for some seconds.
7 Repeat the steps 5 and 6 three times until the
tank is empty.
8 Then plug the iron in and heat it up again until
the remaining water has evaporated.
Push the "clean" button a few times more to
clean the valve.
9
down. Wipe the soleplate with a damp cotton
cloth only.
C
For deep descaling, it is recommended to use
the descaling liquid especially developed by
Bosch. This procedure should be carried out
every 3 months.
2. Then follow the procedure described above in
The descaling liquid may be purchased from our
after-sales service or specialist shops.
D
The "anti-calc" cartridge has been designed to
reduce the build-up of scale produced during
steam ironing, helping to extend the useful life of
your iron. Nevertheless the "anti-calc" cartridge
cannot remove all of the scale that is produced
naturally over time.
18
B O S C H
TextileProtect
The fabric protector (15*) is used for steam-
ironing delicate garments at maximum
temperature without damaging them.
The fabric protector may be purchased from our
after-sales service or specialist shops.
StoreProtect
The "StoreProtect" accessory (17*) enables
an immediate and safe storage of the iron,
even with a hot soleplate (7).
This accessory may be purchased from our
after-sales service or specialist shops.
* Model dependent

Publicidad

loading