Attaching The Forklift To Robotino - Festo 576300 Manual Del Usuario

Attaching the forklift to Robotino

Step 1

Remove the profile rod with the camera. Loosen the two screws identified with blue circles in the
following figure to this end.

When removing the profile rod, make sure that the slot nuts and the screws do not fall into Robotino
Step 2

Insert the module into the Robotino

Secure the module at both sides of Robotino
screws from the outside to the inside and secure the forks with the nuts.
16
®
®
loading bay.
®
with the four M4x10 screws and the M4 nuts. Insert the
®
.
© Festo Didactic 757374