Assembling The Chopper; Chopping Food - ADE KA 2110 Instrucciones De Operación

Use

Assembling the Chopper

Chopping Food

Select the appropriate power level using the On/Off button: I or II.
− Power level I operates at lower power and is particularly suitable for processing
soft foods.
− Power level II operates at higher power and is particularly suitable for harder
foods.
1. Press the appropriate button for a maximum of 30 seconds to chop your
ingredients. Then let the motor cool down for approx. 3 minutes.
2. If the ingredients are not sufficiently chopped, repeat step 1 again.
3. Unplug the power cord from the mains outlet.
4. Remove the motor and the attachment.
24
1. Place the anti-slip base on a flat, dry,
non-slip work surface.
2. Place the glass container on the
anti-slip base.
3. Place the blade attachment onto the
rod in the container (if necessary, turn
it slightly, so that the blade attachment
can be put on completely).
4. Put the ingredients into the container.
The bowl must not be filled more than
2/3 full.
5. Place the lid onto the bowl.
6. Place the motor onto the end of the
shaft of the blade attachment that
sticks out from the opening in the lid.
The motor must sit flush in the lid recess
and must noticeably engage with the
shaft.
If necessary:
− Detach the motor and turn the
shaft of the blade attachment a
little by hand.
− Put the motor back into place.
7. Plug the chopper into an easily
accessible power socket.
Electric Mini Chopper KA 2110