General Safety Rules - Porter Cable PORTA-BAND 7724 Manual De Instrucciones

Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/
or serious injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
To reduce the risk of injury, user must read instruction manual.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never re-
move the grounding prong or modify the plug in any way. Do not use
any adaptor plugs. Check with a qualifi ed electrician if you are in doubt
as to whether the outlet is properly grounded. If the tools should elec-
trically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user. Applicable only to Class I
(grounded) tools.
b) Double insulated tools are equipped with a polarized plug (one blade
is wider than the other.) This plug will fi t in a polarized outlet only one
way. If the plug does not fi t fully in the outlet, reverse the plug. If it still
does not fi t, contact a qualifi ed electrician to install a polarized out-
let. Do not change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power supply
system. Applicable only to Class II (double insulated) tools.
c) Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
d) Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
e) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
f) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
All manuals and user guides at all-guides.com

GENERAL SAFETY RULES

4