Charging The Vehicle; Starting The Charging Process - KS Tools efuturo Instrucciones De Uso

Socket version:
No electrical power supply
Blue
Blue
Green
Green
Red
Red
RFID version:
No electrical power supply
Blue
Blue
Green
Green
Red
Red

Charging the vehicle

!
Warning
Risk of injury due to incorrect handling!
Using an extension cable or a second charging cable represents a risk of electric shock or cable fire. Using extension
cables is not permitted.
• Always use only one charging cable to connect electric or hybrid vehicles and the charging station
• Only use undamaged charging cables

Starting the charging process

It is possible to use the charging station without access control.
For charging stations with RFID access control, prior authorisation via the RFID transponder card at the charging station
is required.
Make sure that the vehicle and charging cable are suitable for Mode 3 charging.
1. Connect the charging cable to the vehicle.
2. Check that the charging cable is correctly positioned in the vehicle and on the Wallbox (for the socket version).
3. (RFID version) Start the charging process by RFID card*.
The charging station now automatically carries out the following steps:
• Detection of current capacity
• Check of the conditions for proper charging
• Communication with the vehicle via the CP contact. The protective earth connection is checked at the same time
• The charging station locks the plug mechanically (for charging stations with integrated charging socket Type 2 and the
optional magnetic lock). The vehicle signals to the charging station that it is ready for charging. The charging process
starts.
OPERATING INSTRUCTIONS
efuturo Wallbox
LED display Active function
Switched off Wallbox switched off, no function
Light shines Establish connection
Light flashes Connection OK
Light shines Charging active
Light flashes Charging process completed
Light shines Overheating, charging interrupted
Light flashes Fault, no charging process
LED display Active function
Switched off Wallbox switched off, no function
Light shines Establish connection
Light flashes Connection OK
Light flashes Charging active
Light shines Charging process completed
Light shines Overheating, charging interrupted
Light flashes Fault, no charging process
18