Troubleshooting - Miracle-Ear MECHARGE Manual Del Operador

After use and before placing in the charger, wipe the
X
charging pins on the hearing aids with a soft, dry tissue
to remove grease or moisture.

Troubleshooting

Problem Possible solutions
■
LED light is off Check if the power supply is
connected correctly.
26
Problem Possible solutions
LED lights are An error in the hearing aid or in the
blinking red 3 charger has occurred.
■
times every 2
Take the hearing aids out of the
sec. charger and disconnect the charger
or from the power supply.
■
LED lights are Reconnect the charger to the power
blinking red in a supply and re-insert the hearing aids
in the charging slots.
sequence
■
Charger has reached the
temperature limit and needs to cool
down. Charging is resumed when
the temperature decreases below
45 °C.
27