Recording Menu; Recording Menu Basic Settings; Hard Disk Full; Sata1 Disk - urmet domus 1093/064S Guía Rápida

2.2

RECORDING MENU

Description
¾
This menu is used to edit the recording and configuration settings of each video signal.
Position the "Active Frame" on the "RECORDING" icon and press "ENTER".
The following window will appear:
The selected item is highlighted.
Press arrows " " to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to edit it. Use buttons "
selected menu item.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
eIMPORTANT NOTE
Reboot the device to make the variations of some settings effective.
2.2.1

RECORDING MENU BASIC SETTINGS

2.2.1.1

Hard disk full

This option can be selected to define the recording method to be used when hard disk capacity is exceeded.
Possible options are: "overwrite" and "stop recording".
In overwrite mode ("overwrite" option), the recording writes over previously stored data.
If "stop recording" is selected, the recording will stop when the maximum capacity of the hard disk is reached.
If several hard disks are present in the DVR, the system will start writing on the SLAVE (secondary) disks when the MASTER
(main) disk is full. When the SLAVE disk is full, the system will start writing over the MASTER disk (if "overwrite" option is
checked) and then back on the SLAVE disks.
2.2.1.2

SATA1 disk

This menu item is used to select the use for the E-SATA output on the rear panel of the device.
Possible options are: "Record" and "Back-up". Use the "
up". Set "Back-up" to use the "Auto Back-up" function.
2.2.1.3

Select camera

This option is used to select the camera on which to edit the recording and configuration settings. Use "
camera. The respective camera will appear in the "Camera name" field (assigned in the "camera" o "name" field).
2.2.1.4

Duration

This menu item is used to set the time (expressed in days) for which the recordings made on all device channels may be played
back (local or via network).
eIMPORTANT NOTE
Time indicates from starting instant of the search.
2.2.1.5

Stream type

2.2.1.6 Stream type
This option can be used to select whether to record only images or both images and audio.
Possible options are: "Video" and "Audio&Video".
Use " " to select the streaming type to be recorded.
eIMPORTANT NOTE
For DVR DVS Ref. 1093/065S, only the "Video" option is available.
¾
For DVR DVS Ref.1093/064S, 1093/066S, the "Video" and "Audio&Video" options are available.
¾
For DVR DVS Ref.1093/066S (16ch), the 4 audio channels are automatically associated to the first 4 video channels.
¾
Audio/video synchronism is maintained if the frame rate setting is between 6fps 25fps.
¾
DS1093-024
All manuals and user guides at all-guides.com
Figure 23: recording menu
" buttons to select the use type. The default option is "Back-
36
" to change the available options for the
" to select the