Cleaning; Packaging, Storage And Transport; Taking Out Of Service / Disposal; Product Compliance And Marking - Martellato 50PR002 Manual De Uso Y Mantenimiento

8.0 CLEANING

Before cleaning the appliance, follow the steps below in the
order given:
1. Switch the appliance off with the ON/OFF switch;
2. Unplug the unit from the 230V
3. Make sure that none of the parts are still hot: if they are, allow
the unit to cool.
To wash the steel plate, use hot water and dishwashing liquid.
How to clean the plastic outer housing:
1. use a damp sponge with warm soapy water or detergents suitable for cleaning tem-
pered glass. Do not use abrasive sponges or steel wool;
2. be careful not to splash accessible electrical parts with water;
3. never immerse the product in water to clean it and make sure there are no residues
still left on the unit before you use it again.

9.0 PACKAGING, STORAGE AND TRANSPORT

The appliance comes packed as follows:
• cardboard box
• operating instructions manual
• EC declaration of conformity
Storage conditions
In its full original packaging, THERMAL Warming Plate must be stored in:
• a dry place
• with temperatures in the -5° to 40 °C range.
16
power socket;
AC
DPL50PR002 - ENGLISH

10.0 TAKING OUT OF SERVICE / DISPOSAL

The product contains the following main kinds of material:
• tempered glass
• metal material
• electrical components
These materials must be disposed of in full compliance with
current environmental regulations.
As specified on the EC Declaration of Conformity,
THERMAL Warming Plate complies with the European RoHS
directive 2011/65/EU.
THERMAL Warming Plate falls into the category of products covered by the Europe-
an directive 2012/19/EU and, as such, is marked with the symbol:
It must be disposed of according to specific provisions relating
to products classed as <large household appliances> and <small
household appliances>.
You should therefore seek relevant information from the competent authorities.

PRODUCT COMPLIANCE AND MARKING

Product imported by Martellato: Via Rovigo, 1/B - 35010 Vigonza PD
Italy - tel. +39 049 7800155 - fax +39 049 8087744
230V ~50-60Hz
nr MATR
Keeping the nameplates described above in good condition is essential for product safety.
If they have deteriorated or become illegible, please order new ones from the
A copy of the EC Declaration of Conformity is attached to this manual.
Materials and items due to come into contact with foodstuffs meet the requirements
of EU and Italian regulations.
IPX3 260 W 1,13 A Classe I
50PR002
MADE IN CHINA
manufacturer.
DPL50PR002 - ENGLISH
17