Installation And Operation Manual - EUROKRAFT K176 341 Instrucciones De Manejo Y Mantenimiento

Installation and Operation Manual

I. Description
The cable winder features an automatic winding function. lt is powered by an encapsulated,
permanently lubricated spring. Working with a desired cable length is made possible by several
catch locations per rotation.
To avoid personal injury or material damage read the instructions carefully before starting to use the
winder.
The cable winder has been inspected for quality and function before delivery.
II. Important indications
1. The voltage value (230 V) given on the drum may not be exceeded.
1. Connected devices have to be in perfect condition and be designed for the intended operational
pressure.
2. When pulling out the cable from the winder please pull on the cable and not on the connected
device.
3. Arbitrarily retrofitting and modifications to the cable winder will cancel the warrantee.
4. Keep cable winder away from sharp and hot objects!
5. If there is damage to the winder or to the connected device, then the winder needs to be
disconnected from the power supply immediately.
6. During the winding of the cable always hold the loose end tight to prevent uncontrolled
winding/clamping.
7. Regular inspection of the cable and the cable winder makes it possible to identify damages
early. Defective parts and cables must be replaced promptly.
8. Make sure that the cable winder is properly and sufficiently attached to the wall/ceiling.
9. Never use the winder in a wet environment. Keep the cable and its surroundings clean.
III. Warranty conditions
The warranty covers material and function defects. Not included are cables, plastic rollers and cable
stoppen. The manufacturer is not liable for damages caused by improper operation and installation
by the user. Arbitrary opening and possible removal or replacement of the cable also cancel the
warranty claim.
4