Enviracaire EFY-041 Serie Manual Del Usuario página 2

ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS FOR LOW FAN HEIGHT OPTION
A. Base Assembly
• Align the two portions of the circular base and snap together by
gently pushing the 4 round extrusions (Fig. 1, Item A) into the
adjacent circles of the connecting piece (Fig. 1, Item B).
B. Securing the Tower Fan to the Base
• Pull the tower fan power cord through the base assembly.
• With the base on a flat surface, align the base arrow marked as
with the tower fan arrow marked as
to lock the tower fan in place (Fig. 2). You will hear a clicking
sound when the base is locked into place.
C. Securing the Cord to the Base
• Carefully turn the fan on its side.
• Locate the cord holding bracket on the bottom of the base.
• Gently pull any slack out of the power cord and place the power
cord securely in the power cord holding bracket (Fig. 3).
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper,
upright position.
D. Placing the Remote Control in the Storage Area
• Locate the remote control that has been provided with the tower
fan. Make sure that the remote control is not thrown out with
the packing materials.
• Install batteries into the remote control battery compartment
(see Battery Installation/Replacement Instructions).
• Place the remote control in the recessed remote holder located
on the top of the fan.
ASSEMBLY INSTRUCTIONS FOR TALL FAN HEIGHT OPTION
(Using pedestal height extender)
NOTE: Product is most stable when pedestal extender is not
used.
A. Pedestal Assembly
• Line up the left and right pedestal assembly and firmly snap
together (Fig. 4).
B. Base Assembly
• Align the two portions of the circular base and snap together by
gently pushing the 4 round extrusions (Fig. 5, Item A) into the
adjacent circles of the connecting piece (Fig. 5, Item B).
C. Securing the Pedestal to the Base
• LINE UP THE ARROW MARKED AS
WITH THE ARROW MARKED AS
ROTATE THE PEDESTAL COUNTER-CLOCKWISE TO
SECURE IN PLACE (FIG. 6). YOU WILL HEAR A CLICKING
SOUND WHEN THE PEDESTAL IS LOCKED INTO PLACE.
All manuals and user guides at all-guides.com
. Rotate the fan clockwise
ON THE PEDESTAL
ON THE BASE AND
Fig. 1
A
B
Base Assembly
Fig. 2
Fig. 3
Fig. 4
Pedestal Assembly
Fig. 5
A
B
Base Assembly
Fig. 6