Enviracaire EFY-041 Serie Manual Del Usuario página 7

EFY-045 SERIES AND EFY-047 SERIES FAN OPERATION (cont'd)
The timer will set itself within 5 seconds of the last time the Up and Down buttons are
pressed. The timer icon will stop flashing. The ambient temperature will once again be
displayed along with the chosen timer hour setting followed by "HR" (see Fig. 13).
When time runs out the fan will turn off.
C. Press the Mode button a third time to activate the combined Temperature/Timer Mode.
In this mode your fan will operate based on the temperature and timer settings set
previously in A and B. If you have not set one of your modes, you may press the
Temp/Timer Mode button a fourth time to start over and follow instructions A and B.
D. Press the Mode button a fourth time to disengage the Temperature/Timer modes and
return to the continuous run mode.
Note: When operating in either mode, the temperature or timer can be adjusted by
pressing the Up or Down buttons. The appropriate icon will blink for 5 seconds after
the last adjustment is made. When operating in the Temperature/Timer combination
mode, no changes can be made to the previous settings. To change the temperature
or timer settings for the combination mode, you must go back through the
temperature and timer set modes and then enter the combination mode.
Oscillation and Ionizer Mode
The fan may be operated in Oscillation or Ionizer mode independently or may be
operated using both features simultaneously.
A. Press the Oscillation/Ionization button (
B. Press the Oscillation/Ionization button twice to activate ionization in addition to
oscillation
C. Press the Oscillation/Ionization button a third time to operate the ionizer and turn
the oscillation fan off
D. Press the Oscillation/Ionization button a fourth time to turn the ionizer off.
Breeze Mode
A. Press the Breeze Mode button (
setting. The low breeze mode operates in accordance with the chosen speed setting
of the fan as follows:
• High Fan Speed: Breeze Mode will alternate between the high and medium speed
settings
• Medium Fan Speed: Breeze Mode will alternate between the medium and low speed
settings
• Low Fan Speed: Breeze Mode will alternate between the low and off setting
B. Press the Breeze Mode button a second time to operate the fan in high Breeze
Mode. This will operate the fan in a random high/medium/low pattern regardless of
the speed setting.
C. Press the Breeze Mode button a third time to turn the Breeze Mode off.
°F to °C Display Change
This is done by simultaneously pressing and holding the Up and Down buttons (
for 2 seconds.
Note: The EFY-045 & EFY-047 Series are not air purifiers. These fans are equipped
with an ionizer feature which helps freshen the air with negative ions creating a crisp,
natural sensation. These units do not make any claims regarding air cleaning or
purification and should not be expected to perform as such. If you have allergy or
asthma symptoms that could be triggered by the presence of an ionizer, an alternate
product would be advisable.
All manuals and user guides at all-guides.com
) once to operate Breeze Mode in the low breeze
) once to activate oscillation
)