Enviracaire EFY-041 Serie Manual Del Usuario página 6

EFY-041 SERIES REMOTE CONTROL OPERATION (cont'd) EFY-041 SERIES REMOTE CONTROL OPERATION
Flashlight Feature:
Press and hold the Flashlight button (
activate the Flashlight.
Note: Only one bulb will activate when using the flashlight feature. The Remote Control
has only one light. The second bulb is the Remote Transmitter.
Remote Control Storage
The remote control may be stored in the recessed area located behind the controls when
it is not in use.
EFY-045 SERIES AND EFY-047 SERIES FAN OPERATION
Power and Speed Mode
A. Press the Power button (
B. Press the Power button twice: Fan will change to Medium speed (
C. Press the Power button a third time: Fan will run at Low speed (
D. Press the Power button a fourth time: Fan will turn off
Note: The fan will run continuously on high speed when initially activated. The
temperature displayed will be the current ambient temperature.
Timer and Temperature Mode
A. Pressing the Mode button (
thermometer icon ( ) will display and blink on the LCD screen and the room temperature
will be displayed. The default temperature setting is 74°F. To change the temperature
setting, press the Up and Down buttons (
degree increments between 60 and 90 degrees. The temperature will set within 5
seconds of the last time the Up and Down buttons are pressed. The thermometer icon
will stop flashing and the current room temperature will once again be displayed. The fan
will automatically turn off when the selected temperature is reached. If the room
temperature exceeds the selected temperature setting, the fan will turn on.
B. Press the Mode button a second time to activate the Timer Mode. The clock
icon ( ) will display and blink on the LCD screen.
Note: The temperature set mode will automatically disengage once the Timer Mode is
activated. The LCD screen will display a default timer setting of 10 hours. To set the
timer, use the Up and Down buttons to set the timer off function between 1 and 12
hours in 1 hour increments.
Fig. 13
Power light
Press to turn fan
on or off and set speeds
Press to activate temperature
and/or timer modes
Press to activate
breeze modes
All manuals and user guides at all-guides.com
) located on the back of the remote control to
) once: Fan will activate and run on High speed (
) once will activate the Temperature Mode. The
). The fan may be programmed in two
Ionizer
indicator light (a)
Note: Ionizer is engaged when green light is on (a)
)
)
)
Press to set temperature
degrees and/or timer hours
Press to activate
oscillation and/or ionizer