Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel using (4) #(8)
x 3/8" Phillips screws supplied.
(Figure A)
2. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse
order of disassembly.
All manuals and user guides at all-guides.com
Kit Assembly
(Figure A)
95-7018
(Figure B)
3
Publicidad
