Important Safety Instructions - Makita BHR200 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Battery cartridge
2 Red part
3 Button
4 Switch trigger
5 Reversing switch lever
6 A side
7 B side
8 Rotation with hammering
9 Lock button
10 Pointer
11 Change lever
SPECIFICATIONS
Model
Capacities
Concrete ............................................................ 20 mm
Steel .................................................................. 13 mm
Wood ................................................................. 27 mm
-1
No load speed (min ) ....................................... 0 – 1,100
Blows per minute .............................................. 0 – 4,700
Overall length .....................................................316 mm
Net weight ...............................................................3.8 kg
Rated voltage ....................................................D.C. 24 V
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS ROTARY HAMMER SAFETY
WARNINGS
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
All manuals and user guides at all-guides.com
Explanation of general view
12 Rotation only
13 Hammering only
14 Foot
15 Screw
16 Side grip
17 Bit shank
18 Bit grease
19 Bit
20 Chuck cover
O
21 symbol
22 Depth gauge
BHR200
ENE043-1
GEA010-1
GEB046-2
23 Clamp screw
24 Grip base
25 Dust cup
26 Blow-out bulb
27 Drill chuck
28 Limit mark
29 Brush holder cap
30 Screwdriver
4. Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5. Be sure the bit is secured in place before opera-
tion.
6. Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
7. In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
8. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9. Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
only when hand-held.
12. Do not point the tool at any one in the area when
operating. The bit could fly out and injure some-
one seriously.
13. Do not touch the bit or parts close to the bit
immediately after operation; they may be
extremely hot and could burn your skin.
14. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
ENC005-2
5