tuctuc bliss i-size Instrucciones De Uso página 26

Instala�on
When installing the seat in the front vehicle seat make sure the
packrest of the vehicle is in an upright posi�on.
Use Vehicle 3-point belt+Isofix a�achment
1. Posi�on the seat inside the vehicle. Squeeze and pull the ISOFIX release bu�ons
to release the ISOFIX a�achements. (fig.2). The ISOFIX a�achements lock only in the
posi�on where it is totally extended.
2. Click the ISOFIX a�achements to the ISOFIX anchorage points in the vehicle seat
(fig.3). Make sure that all ISOFIX indicators are GREEN (fig.4). Push the seat as far as
possible towards the backrest of the vehicle seat.
3. Slide the shoulderbelt in the shoulderbelt guide (fig.5). Make sure the belt is not
twisted.
Use Vehicle 3-point belt only
1. If the seat cannot be used in combina�on with ISOFIX anchorage points in the
vehicle seat, the ISOFIX a�achements can be stowed inside the seat and the seat can
be used in combina�on with the 3-point belt only.
2. Posi�on the seat inside the vehicle. Slide the shoulderbelt in the shoulderbelt
guide (fig.5). Make sure the belt is not twisted.
Posi�oning of the child
1. Adjust the headrest to the correct height by squeezing the Height adjuster (fig.6).
The headrest must be adjusted that there is a space on finger wide between the
headrest and your child's shoulders (fig. 7).
2. The seat has two posi�ons. For reclined posi�on Sliding out the reclining handle
at the bo�om of the base, in this posi�on might not fit in all vehicles. Posi�on the
seat in the correct posi�on before posi�oning the child with the vehicle belt (fig.8).
3. Posi�on the vehicle belt in front of the child and lock the belt into the buckle of
the vehicle (fig.9).
26