Dimensions - Phonic AM440D USB-K1 Manual De Usuario

SPECIFICATIONS
Model Name
Inputs
Total Channels
Balanced Mono Mic / Line Channel
Balanced Stereo Line Channel
Outputs
Main L/R Stereo
Rec Out
Phones
Channel Strips
EFX Send
Pan/Balance Control
Volume Controls
Master Section
Phones Level Control
Main L/R Level Control
Level Meter
Phantom Power Supply
Wireless
Connector
Compatible Microphone Kits
USB Audio
Connector Type
Bitrate
Sampling Rate
Frequency Response (Mic input to any output)
20Hz ~ 60KHz
20Hz ~ 100KHz
Crosstalk (1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs)
Channel fader down, other channels at unity
Noise (20Hz~20KHz; measured at main output, Channels 1-4 unit gain;EQ flat; all channels on main mix; channels 1/3 as far left as
possible, channels 2/4 as far right as possible.
Reference=+6dBu)
Master @ unity, channel fader down
Master @ unity, channel fader @ unity
S/N ratio, ref to +4
Microphone Preamp E.I.N. (150 ohms terminated, max gain)
THD (Any output, 1KHz @ +14dBu, 20Hz to 20KHz, channel inputs)
CMRR (1 KHz @ -60dBu, Gain at maximum)
Maximum Level
Mic Preamp Input
All Other Input
Balanced Output
Impedance
Mic Preamp Input
All Other Input (except insert)
RCA 2T Output
Equalization
Low EQ
Mid EQ
Hi EQ
Low Cut Filter
Effect Processor
Power Requirement (external power supply, depends on region)
Weight
Dimensions (WxHxD)
AM440D USB-K
AM440D USB-K
8
4
4
2 x 1/4" TRS, Bal.
Stereo RCA
1
6
1
Yes
Rotary
Yes
Main L/R, 60mm fader
2 x 4-segment
+48VDC
USB Type A
UTM-10, UTM-20
Stereo In/Out
USB Type B
16-bit
48 kHz
+0/-1 dB
+0/-3 dB
<-90 dB
-86.5 dBu
-84 dBu
>90 dB
<-129.5 dBm
<0.005%
80 dB
+10 dBu
+22 dBu
+28 dBu
2 K ohms
10 K ohms
1.1 K ohms
3-band, +/-15 dB
80 Hz
2.5 KHz
12 KHz
75Hz (-18dB/oct)
100 effects with tap delay control
100VAC, 120VAC, 220~240VAC, 50/60Hz
1.72 kg (3.78 lbs)
242 x 55 x 225mm (9.5" x 2.16" x 8.86")
7