Operation; Switching On And Off; Pairing With A Device Via Bluetooth; Bluetooth® Connection With A Usb Bluetooth® Adapter - Beyerdynamic SPACE Instrucciones De Uso

OPERATION

Switching on and off

To switch on:
► Press the on/off button for 1 to 3 sec.
To switch off:
► Press the on/off button again for 1 to 3 sec.
Pairing with a device via Bluetooth®
Before you can use the beyerdynamic SPACE Personal
Speakerphone, you must pair it with your mobile phone
or another Bluetooth®-enabled device. The connection
process may differ depending on the device.
► Please refer to the relevant operating instructions of
the device with which you wish to pair the Personal
Speakerphone.
To establish a connection:
9 Ensure the beyerdynamic SPACE Personal Speaker-
phone is switched on.
1 . Press and hold the
The Bluetooth® connection mode will start.
The LED display flashes alternately blue and red.
2 . Activate the Bluetooth® function on the playback
device and search for new devices if necessary.
3 . In the Bluetooth® menu of the playback device, select
"SPACE" from the available devices and connect both
devices.
After a successful connection, the LED lights up blue.
Each time the device is switched on again, the devices
will connect as soon as they are within range of each
other.
Connecting with Google Fast Pair:
Android devices from Android 6.0+ enable a fast connec-
tion via Google Fast Pair.
1 . Start the connection to your beyerdynamic SPACE
Personal Speakerphone as described above.
"beyerdynamic SPACE Personal Speakerphone" is
displayed on the connected device.
2 . Select "beyerdynamic SPACE Personal Speakerphone".
The two devices are connected.
If the Bluetooth® connection has been lost, the LED briefly
flashes blue every 2.5 sec.
Deleting the list of already connected devices:
► Press the
button for longer than 10 sec.
The list of already connected Bluetooth®devices
(maximum eight) is deleted and a connection to the
active Bluetooth®device is established.
A double signal tone confirms success.
beyerdynamic SPACE Personal Speakerphone
button for 1 to 3 sec.
Bluetooth® connection with a USB
Bluetooth® adapter
A USB Bluetooth®-Adapter is required to enable a wire-
less Bluetooth® connection to a laptop or desktop PC
while ensuring compatibility and synchronisation of the
corresponding commands from related communication
platforms such as Microsoft Teams. The standard laptop
and desktop PC Bluetooth®protocols do not support
these commands.
The USB Bluetooth® adapter (optionally available) has
a pairing button to be able to connect it to a beyerdy-
namic SPACE Personal Speakerphone. It can be stored
on the underside of the beyerdynamic SPACE Personal
Speakerphone.
For more information, please refer to the operating
instructions of your USB Bluetooth®adapter.

Connection displays

LED display of the connection status:
Bluetooth®:
Pairing/recognition possible
Bluetooth®:
Connected
Bluetooth :
®
Connectable / connection lost
Connected to USB
Connecting two speakerphones to form
a stereo pair (for music playback)
To set up a cascade
1 . Press the
button and the
simultaneously for 1 to 3 sec on the first
SPACE device.
2 . Press the button and the
simultaneously for 1 to 3 sec on the second
SPACE device.
The two SPACE devices connect via True
Wireless.
When the two devices are successfully
paired, you will hear "cascade successful"
Operation
Flashes blue
and red
alternately
Steady blue
Flashes blue
Entire LED
ring lights up
white
button
Flashes
red
button
Flashes
red
9/14