Assembly - Parkside PBZS 5 A1 Traducción Del Manual De Instrucciones Original

Assembly

NOTE
► In addition to the supplied product, you will need
a drill with a round shank adapter, a 4 .5 mm drill bit
and an AF 7 mm open-ended spanner .
► In addition, you will need a wooden board that the
product and the drill will fit on completely .
♦ Place the product and the drill on the wooden board
so that they rest completely on the wooden board .
Mark out the drill holes .
♦ Use a 4 .5 mm drill bit to drill two holes in the wooden
board .
♦ Secure the product using the supplied screws, washers
and retaining nuts .
GB │ IE
■ 8
│ PBZS 5 A1