Pumping Water - Parkside PBZS 5 A1 Traducción Del Manual De Instrucciones Original

Pumping water

ATTENTION! PROPERTY DAMAGE!
► The product is self-priming and may only be allowed
to run dry for a maximum of 30 seconds .
►
► The temperature of the pumped liquid must not
exceed 40°C .
♦ Place the open end of the suction hose into the liquid
to be pumped . At least 1 metre of the suction hose
must be free of liquid in order to be able to pump the
liquid optimally . Make sure that the intake hose does
not draw in any air . The maximum suction height is
3 metres .
♦ Place the open end of the pressure hose where the
liquid is to be pumped . The maximum delivery height
is 15 metres .
■ 10
│
The maximum speed is 2800 rpm .
GB │ IE
PBZS 5 A1