Figure 3
LCD screen
OK button
MENU button
ON / SET / OFF
Navigation buttons
switch
/ / /
3. Installing the batteries
The camera runs on 8 AA size batteries. The product can work with alkaline or Ni-MH rechargeable
batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on www.numaxes.com.
Before inserting or removing the batteries, the camera must be turned off (switch in the OFF position).
When inserting the batteries, make sure to follow polarities indicated inside the battery slot. Upside down
batteries may cause device malfunction.
NOTE: Don't mix battery types! This may cause permanent damage not covered by the guarantee.
Remove the batteries from the camera if you are not using it for 3 months or more. The batteries could leak
and damage your product.
This camera can also be powered by an external power supply 6V/2A (5.5 x 2.1 mm jack).
The external power port is located at the bottom of the device.
4. Installing the memory card
The camera doesn't have an internal memory.
Using a memory card is required to operate the
camera (microSD card from 4GB up to 32GB
maximum – class 10 minimum).
You can purchase 8GB, 16GB or 32GB microSD
cards at any time at www.numaxes.com.
Before inserting or removing the memory card, the camera must
be turned off (switch in the OFF position). Failing to do so may
cause loss of or damage the files already recorded on the card.
PIE1059 - Indice B – Octobre 2021
15/56