Mounting The Flip Cover - Blaser Flip Cover Manual De Instrucciones

ATTENTION!
Permanent magnetic fields can also erase data from magnet
storage mediums, e.g. computer discs, hard drives, bank cards
and credit cards, making them useless. Therefore permanent
magnets should not come into close contact with such storage
mediums.

Mounting the Flip Cover

The images
operating instructions.
1. Before proceeding to the next step, make sure that the
weapon is unloaded and the bolt is open.
2. Before mounting the Flip Cover on the objective of the
Blaser rifle scope, the cover [1] must be opened.
3. The threaded ring [3] is screwed in as shown in figure
tightened hand-tight using the grooves on the face and the
18
A to E for assembly can be found at the end of the
5 cm minimum distance
away from the Blaser Flip
Cover !
A and