Additional Menu Parameter - Dascom Tally T2150S Guia De Instalacion

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Cutter-en.book Seite 15 Donnerstag, 3. Mai 2007 9:42 09
Quick start guide
Additional menu
parameter
All manuals and user guides at all-guides.com
With the cut device installed, the AutoCut parameter appears in place of the Au-
toTear parameter in the menu.
Parameter group
Parameter
AutoCut
ViewCut=Off*
View=1s
View=3s
View=6s
Cut=1s
Cut=3s
Cut=6s
Cut at TOF
Cut on Formfeed
The printer detects the cut device during initialization and replaces the Tear func-
tion by the Cut function. All menu settings and escape sequences previously relat-
ing to the Tear function will then be applied to the Cut function.

Additional menu parameter

Description
The Auto View, the Auto Cut, the Cut at
TOF or the Cut on Formfeed functions can
be optionally selected.
With ViewCut=Off selected, the paper is
neither fed automatically to the View posi-
tion nor cut.
With Auto View selected, the previously
printed text is visible. The paper is
returned to the normal printing position as
soon as data are received. After the print-
out, the printer waits for the set period and
then returns the paper to the Auto View
position.
With Auto Cut selected, the paper's active
length is the cutting position. The paper
returns to the normal printing position as
soon as data are received. After the print-
out, the printer waits for the set period and
then returns the paper to the cutting posi-
tion and cuts it (see also Setting the cut-
ting position).
If Cut at TOF is selected, the paper is cut
whenever the form length is exceeded.
If Cut on Formfeed is selected, the paper
is only fed when the printer receives a
FormFeed (0C hex) command.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido