Next, hold the barrel between two people by its ends and insert it inside the machine. It is very important that the slots at both ends
11
rest correctly on the four rollers on the sides of the inside of the equipment, as shown in the following image. Failure to do so may cause
mechanical damage to the machine and its malfunction.
Then close the main swing hatch, fit the two barrel side covers and the two collection boxes.
11
Finally, reconnect the equipment to the electricity supply, to make it fully operational again.
12
32
IMPORTANT: Make sure that the electrical cable is perfectly positioned,
without forming loops that could cause tripping.
www.masterproducts.es
End slot of the barrel
Roller