Technical Data - Air Liquide Soffio plus Manual Del Usuario

If you have failed to solve the problem after performing the above checks and the device still does not work, have it checked by an
authorized service centre.

6 - TECHNICAL DATA

Supply voltage
Operation
Maximum air pressure
Maximum air flow
Dynamic air flow with nebuliser
Maximum input
Protection fuse
Dimensions of the basic unit
Weight of the basic unit
Noise level at 1 m
Minimum nebuliser filling volume
Maximum nebuliser filling volume
Aerosol output with nebuliser (*)
Minimum aerosol output rate with nebuliser (**)
MMAD with nebuliser, graph 1 (*) (***)
The MMAD values shown are measured using a MACH 2 API AEROSIZER.
The y-axis of the graphs represent the percentage of volume of atomised solution with sizes lower than the corresponding dimensional
value expressed in μm on the x-axis.
(*) For a quantity of 2 ml.
(**) The values shown refer to the use of physiological solution (0.9% NaCl) and may vary with the drug used. The values given do not
apply to drugs in suspension or high-viscosity drugs. The manufacturer of the drug can provide the necessary details.
(***) 50% by volume of the atomised particles are less than the MMAD (Median Mass Aerodynamic Diameter). This value is indicative of
the nebuliser's ability to produce particles suitable for a specific therapeutic treatment.
7 - DISPOSING OF THE APPARATUS AND ITS COMPONENTS
At the end of their useful life, the device and its components must be disposed of in accordance with the current regulations and
environmental laws. If no legal obligations exist, the various materials must be sorted and disposed of separately.
The table below shows the materials of which the various components are made.
None of the materials used contains phthalates or traces of natural Latex.
COMPONENT
Basic unit (1)
External casing of the basic unit
Nebuliser (9, 11)
Atomiser (10)
Mask body (12) and fitting (13)
Mouthpiece (14)
Connecting tube (15)
Box
Instructions
• ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH
See rating plate on the device
Continuous
2.5 bar
12 l/min
6 l/min
115 VA
F1,6 A
190x130x120H mm
1,5 kg
59,3 dBA (to UNI EN 13544 -1)
1ml
8 ml
0.75 ml (**)
0.30 ml/min (**)
1.9 μm (**)
GRAPH 1
MATERIAL
Waste from Electric and Electronic Equipment (WEEE)
ABS/Polystyrene
Polycarbonate
Nylon
Silicone and polycarbonate
Polycarbonate
Non-toxic PVC (phthalate-free polyvinyl chloride)
Cardboard
Paper
9