About This Documentation - Emerson AVENTICS CO1 Instrucciones De Servicio

1 About this documentation

Read this documentation completely, especially chapter g 2. Safety before work-
ing with the product.
These instructions contain important information on the safe and appropriate as-
sembly, operation, and maintenance of the product and how to remedy simple
malfunctions yourself.
1.1 Documentation validity
This documentation is valid for CO1 series solenoid coils with electrical connector
in the following versions:
• R412000144
• R412000145
• R412000146
• R412000147
This documentation is intended for:
System owners, system planning engineers, machine manufacturers, installers
1.2 Additional documentation
Apart from this documentation, you will not receive any further documentation
on the product or on the system or machine in which the product is installed.
However, observe the following related documents:
• Actuated valve documentation
• Manufacturer's system documentation
Additionally always observe the following regulations:
• General, statutory and other binding rules of the European and national laws.
• Applicable regulations for accident prevention and environmental protection.
1.3 Presentation of information
1.3.1 Warnings
Warnings of personal injury and damage to property are highlighted in this docu-
mentation. The measures described to avoid these hazards must be followed.
Display as highlighted box
Warnings that are displayed in the form of highlighted boxes have the following
structure:
Hazard type and source
Consequences of non-observance
Precautions
u
Presentation with highlighted signal word
Instructions and lists often contain warnings that are integrated into the text. In-
line warnings are introduced with a bold signal word:
CAUTION! Do not exceed permissible bending radii.
Meaning of the signal words
Signal word Meaning
Danger Immediate danger to the life and health of persons.
Failure to observe these notices will result in serious health conse-
quences, including death.
Caution Possible dangerous situation.
Failure to observe these notices may result in minor injuries or dam-
age to property.
Notice Possibility of damage to property or malfunction.
Failure to observe these notices may result in damage to property or
malfunctions, but not in personal injury.
1.3.2 Symbols
Recommendation for the optimum use of our products.
Observe this information to ensure the smoothest possible operation.
1.4 Abbreviations used
This documentation uses the following abbreviations:
AVENTICS™ CO1 | R499050034-BAL-001-AI | English
SIGNAL WORD
Abbreviation Meaning
AC Alternating current
ED Duty cycle
EMC Electromagnetic Compatibility
Explosion protec- Explosion protection zone as defined by ATEX directives
tion zone
Gas-ex Gas explosion protection
Dust-ex Dust explosion protection
2 Safety
2.1 About this chapter
The product has been manufactured according to the accepted rules of current
technology. Even so, there is danger of injury and damage to equipment if the
following chapter and safety instructions of this documentation are not followed.
• Read this chapter and this documentation completely before working with
the product.
• Keep this documentation in a location where it is accessible to all users at all
times.
• Always include the operating instructions when you pass the product onto
third parties.
2.2 Intended use
The product is an electrical system component.
The product was manufactured for the following applications:
• The product is intended for professional use and not for private use.
• The product is exclusively intended to be installed in an end product (such as a
machine or system) or to be assembled with other components to form an
end product.
Application area
The product is designed only for use in the following areas:
• Industrial applications
Operating site
• Only use the product indoors.
INFO: If the product is to be used in a different area: Obtain an individual li-
cense from the relevant authorities or inspection center.
• Application only with basic valves from AVENTICS GmbH: Only basic valve
with ATEX identification or basic valve without their own potential source of
ignition.
• The product must first be installed in the machine/system for which the prod-
uct is intended. The product may only then be commissioned.
• Observe the technical data and the specified operating conditions and perfor-
mance limits.
• Intended use also includes having read and understood these instructions in
full, in particular the section on g 2. safety.
Products with Ex identification according to the requirements of the ATEX
directive 2014/34/EU. They may be used in accordance with the applica-
ble installation regulations for devices and systems in explosive areas.
ATEX specifications and operating conditions: see section g 5.3. Use in
explosive areas
2.3 Improper use
Any use other than that described in the section "Intended use" is considered im-
proper and is not permitted.
AVENTICS GmbH is not liable for any damages resulting from improper use. The
operator alone bears the risks of improper use of the product.
Improper use of the product includes in particular use in firedamp protection ar-
eas.
2.4 Obligations of the operator
Compliance with regulations
• Observe the regulations for accident prevention and environmental protec-
tion.
11