Teka EFX FRYER Serie Manual De Usuario página 20

TECHNICAL DATA FOR
INSTALLERS
Installation and maintenance listed in this
section must only be carried out by qualified
personnel.
A faulty installation can cause damage to
persons, animals or objects, towards whom the
manufacturer cannot be held responsible.
The cut-off or automatic control devices of the
appliance can only be modified by the
manufacturer or by a duly authorized supplier.
3) INSTALLING THE FRYER
Remove outer packaging and inner packing of the
various loose parts, then make sure the fryer is not
damaged. In case of doubt do not use the
appliance and contact a qualified technician.
Packaging (cardboard, bags, expanded
polystyrene, nails...) are potentially dangerous.
Keep them out of the reach of children.
An opening in the top of the piece of modular
furniture must be made with the dimensions
indicated in fig. 4, making sure that the dimensions
of the space required to install the appliance are
observed (see fig. 5).
In order to avoid accidental touch with the
overheating bottom of the hob, during the working,
is necessary to put a wooden insert, fixed by
screws, at a minimum distance of 170 mm from
the top (see fig. 4/A)
CAUTION:
do not place the glass directly on the unit.
The bottom of the hob must rest on
the unit.
20