Inspections And Maintenance; Transportation And Storage; Troubleshooting - Gude GSS 400 Instrucciones De Uso Originales

Circular saw blade sharpening (pict. 2 a 10)
•
After you adjust everything, set the safety pin (pict. 10)
so it will press a little against the saw blade.
• Turn the machine on and start sharpening the saw blade
(pict. 2/10).
•
Press the handle (pict. 2/14) down so the rotation of the
grinding wheel corresponds with saw blade rotation and
the depth gauge is reached.
•
Pull the grinding wheel back and turn the saw blade so
another tooth can be sharpened.
• Repeat these steps until all teeth are sharpened.
•
In case of double teeth disc, sharpen every second tooth,
then change the angle and sharpen the rest of teeth.

Inspections and Maintenance

Unplug the unit before any maintenance/adjustment
and cleaning. Unplug upon finishing the work as well
Unplug the unit before any maintenance/adjustment and
cleaning. Unplug upon finishing the work as well Keep the
machine clean and free of any dust. Oil the slide well to
prevent jerking.
Safety instructions for the inspection and maintenance:
Only a regularly maintained and well serviced product can be a
satisfactory tool. Lack of maintenance and care can lead to
unexpected accidents and injuries.
Inspections and Maintenance Schedule:
Time Description
Interval
After every Wipe the unit with clean dry cloth
use or blow off with low-pressure air.

Transportation and Storage

The unit has been designed for stationary use only.
Any tools that are not routinely used should be stored in a dry
locked room.
Troubles-Causes- Troubleshooting
Trouble Cause
Burning 1. The sharpening surface
disc excessively lubricated.
(blunt) 2. Worn diamond layer.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy
at our webpage www.guede.com in the Services section.
Please help us be able to assist you. To identify your machine
when claimed, we need to know its serial No., order No, and
year of production. All these details can be found on the type
label. Enter the details below for future reference.
Serial No.:
Order No.:
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
Other Details
if Required

Troubleshooting

1. Clean the unit with
the sharpening tool.
2. Replace the disc
14