Phil&Teds traveller 2021+ Manual Del Usuario página 38

EN
adult bed using the attachment system. • There must be
no more than 12mm gap between co-sleeper and adult
bed. • Check tightness before each use by pulling co-
sleeper in a direction away from adult bed. • If gap exceeds
12mm, DO NOT use product. Do not fill the gap with
pillows, blankets or other items that are suffocation hazards.
WARNING – Always use ALL required parts for each use
mode. Check instruction manual for a list of required parts.
Periodically check product for loose, damaged or missing parts.
WARNING – The attachment system
must always be used in co-sleeper mode.
WARNING – To avoid death from the infant's neck being
caught on the top rail on the side that is next to the adult bed,
the top rail must be no higher than the adult bed mattress.
AS A COT:
• MATTRESS SIZE This cot is made to use a mattress which is
900mm long by 700mm wide and not more than 25mm thick.
• Using the wrong size mattress may create hazardous gaps
that could result in suffocation or could reduce the side height
of the cot which may result in your child falling out of the cot.
• Do not leave anything in the cot (such as toys) that provide
a foothold. • Do not use the cot near naked heat sources, bar
heaters, open fires or exposed flames. • Keep the cot clear
of trailing cables and hanging cords. • Keep medication, and