Sleep Timer; Dimmer Control - Brandt BCR190SLIM Manual De Instrucciones

SLEEP TIMER
twice to enter the sleep mode.
1. Press
 The SLEEP indicator light will illuminate and "05" (5 minutes) will flash on the
display.
2. While the sleep time is flashing, repeatedly press
from 5, 15, 30, 45, 60, 75 or 90 minutes.
3. The radio will be turned off after the set sleep time has elapsed.
To check remaining sleep time, press
To turn off the radio before the sleep time has elapsed, press
DIMMER CONTROL
In order to adapt the intensity of the display to suit the ambient room lighting,
repeatedly press
settings. This can only be done when the radio is off or the unit is not sounding.
SPECIFICATIONS
FM 87.5‐108.0MHz
INPUT: DC 5V
Battery backup: 1 x CR2032
We apologise for any inconvenience caused by minor inconsistencies in these
instructions, which may occur as a result of product improvement and development.
to select the display brightness among high, low and off
300mA
to set the desired sleep time
twice.
Darty Plc © UK: EC1N 6TE 22 /09/2014
EN‐6
.