Rupes HR81M Manual De Instruccion página 6

V----
Product contains Lithium-Ion. Do not dispose this product with household rubbish
Li-Ion
Wh
N0
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT.
ANSI Z87.1 eye protection,
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to fi lter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and other
construction activities. Wear protective clothing and wash exposed areas with soap and water.
Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent
respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust
exposure. Direct particles away from face and body.
CAUTION: Use extra care when working into a corner because a sudden, sharp movement of the polisher may
be experienced when the wheel or other accessory contacts a secondary surface or a surface edge.
6
Summary of device labels containing safety information
WARNING: To reduce the risk of injury, user must read instruction manual
Volts Alternating Current
Wear ear protection
Wear eye protection
Watt per hour
No-load speed
Arrow – act in the direction indicated by the arrow direction
Ah Ampere per hour
Wear a gloves
Wear a mask
V
/min Per minute
Volt