Assembly; Contents Of Carton - Craftsman 919.166701 Manual Del Propietário

All manuals and user guides at all-guides.com

Contents of Carton

1 - Air Compressor
2 - Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
2 - Rubber Bumpers
2 - Screws, 1/4-20 x .75"
1 - Quick Connect
1 - Safety Check Valve
Tools Required for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
The wheels and
handle do not
provide adequate clearance,
stability or support for pulling the
unit up and down stairs or steps.
The unit must be lifted or pushed
up a ramp.
It may be
necessary to brace
or support one end of the unit
when attaching the wheels and
the rubber feet, because the air
compressor will have a tendency
to tip.
1. Place shoulder bolt (C) through
wheel (B) and position it into the
hole of the mounting bracket
(protruding hub to the inside).
A13570

ASSEMBLY

Thread nut (A) onto shoulder
bolt and tighten firmly with a
9/16" wrench. Repeat to install
second wheel.
E
2. Attach the rubber feet (D) to the
bottom of the front bracket using
the screws (E) provided.
3. Rotate handle into operating
position as shown.
NOTE: Handles will lock into
place.
10- ENG
C
A
B
D