Parts And Components; Before Use; Operation - cecotec COOK CONTROL 10400 Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. M button: Unit-change button (g/oz/ml/cup)
2. T button: Power button/Tare function

2. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.

3. OPERATION

Turning on the device. Press the T button.
Switching the device off
Press the T button for two seconds to switch the device off.
The device will be turned off automatically after 60 seconds of no operation.
Changing the unit
Press the M button once to change the unit from g to oz, from water ml to water cups and milk
ml to milk cups.
Fig. 2
Place a container on the platform and press the T button to clear the container's weight.
Then, pour water or milk into it and press the M button to choose if the measuring unit should
be ml or cups.
Weighing
Place the scale on a hard and flat surface.
Press the T button once and the LCD display will show "0".
Place the foodstuff on the weighing platform. Its weight will be displayed.
Fig. 3
Tare function
Place a container on the weighing platform. The LCD screen will show the container's weight.
Press the T button to clear the container's weight (reset to zero). Then, place food in the
20 COOK CONTROL 10400 EASYHANG