Setting The Clock; Setting The On/Off Timers - Hayward S.Line Pro Fi Manual De Instalación E Instrucciones

4. USER INTERFACE (continued)

4.3 Setting the clock

At the end of the settings, press
The saving of the settings is automatic after 5 seconds of inactivity.
• Press : the time display blinks.
• Press : the hours blink. Set the hours using the
• Press then set the minutes using the
• Confirm by pressing

4.4 Setting the On/Off timers

Setting this function is necessary if you would like to run the heat pump for
a shorter period than what is defined by the filtration clock. Therefore, you
can program a deferred start and an anticipated stop or simply stop a certain
timeframe from running (at night, for example).
It is possible to set one Start Timer (ON) and one Stop Timer (OFF).
Setting the Timer - Start (ON)
• Press for 2 seconds, until the
• Press : the
• Press to set the hours using the
• Press to set the minutes using the
• Confirm by pressing
The settings are saved automatically after 20s of inactivity.
The setting of the minutes is done in steps of 10 minutes
The ON indication under the time display on the main screen indicates that
the Start (ON) Timer is set.
to confirm.
.
icon blinks.
display blinks (
then to return to the main screen.
and
and buttons.
).
and buttons.
and buttons.
buttons.
15