Trouble Shooting - Eleglide D1 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7. Trouble Shooting

Code
Possible Causes
ERRO 1
Motor Problem
ERRO 2
Accelerator
ERRO 3
Controller Problem
ERRO 4
Brake Lever Problem
ERRO 5
Low-voltage protection
ERRO 6
Communication failure, Led
display can not receive the
instruction from controller
ERRO 7
Communication failure, controller
can not receive the instruction
from Led display
Problem
Display and power
indicator does not
work
Battery does not
charge
Insufficient Range
Motor does not
work
Attention: If any other failures occurred and you can not find any solution above, please contact the
re-seller to solve it. And if you need to which need professional tools, in order to avoid danger, the
machine must be repaired or replaced by manufacturer, other maintenance offices or professionals
from similar offices.
LED Display Error Code
Other Problem
Possible Causes
a.No power supply for vehicles.
b.The electric wire is not plugged in
properly
c.Display is damaged
d.Controller burnout or water damage
a.Charger is not plugged in properly
b.Battery if out/below of temperature
site.
c.Battery is under rated voltage
a.Battery is not in full charge.
b.Tyre pressure is low
c.Frequent braking
d.Battery aging or attenuation
e.Low ambient temperature, battery
a.The electric wire is not plugged in
properly
b.Sensor / controller is inefficient
Solutions
a.Check and Plug the wire in properly.
b.Revise/Replace the Motor
a.Revise/Replace LED Dispaly
a.Revise/Replace controller
a.Replace the Brake Lever wire.
b.Replace the brake lever
c.Contact re-seller.
a.Charge it.
b.Contact re-seller.
a.Check and Plug the wire in properly.
b.Replace the motor
c.Replace the LED display
d.Contact re-seller.
a.Check and Plug the wire in properly.
b.Replace the motor
c.Replace the LED display
d.Contact re-seller.
Solutions
a.Charge the battery
b.Reconnect the electric wire
properly
C & d. Contact the re-seller for
helping to solve it.
a.Plug the wire in properly.
b.Contact re-seller.
a.Plug in properly and charge.
b.Make sure it is the resume
Charging temperature.
c.Contact re-seller.
a.Charge the battery fully.
b.Check the pressure before
every use.
c.Develop good drive habits.
d.It's normal.
e.Contact re-seller.
09
EN

Publicidad

Tabla de contenido
loading

Productos relacionados para Eleglide D1

Este manual también es adecuado para:

D1 master

Tabla de contenido