Assembling Your E-Scooter - Eleglide D1 Manual Del Usuario

4. Assembling Your E-scooter

1) Get it out and unfold it: Unfold the handlebar
stem and fasten. Then unfold the kickstand to
support the e-scooter.
3) Display Assembling: Put it on the right
handlebar and fasten it in the right position with
the tool in the package.
2) Check the handlebar: Lift up the handlebar
and check if it's fasten. If handlebar is loose, Fold
the handlebar and fasted the screw with the
included hex wrenches.
4) Saddle Assembling (For D1 which with the
saddle only）
a.Lift up the seat post and fasten it with the nut.(twist
the nut, make sure the seat post is steady).
b.Loose the quick release clip. Put the saddle in the
seat post and fasten the clip with a suitable height for
you.
05
EN