Standard Kit / Accessories; Main Parts / Specifications - Rehau EVERLOC+ Manual De Instrucciones Del Producto

- To reduce the risk of unintended activation, remove the battery before
changing or adjusting the expander head or compression jaws.
Pinching fingers or trapping other parts of your body in the expander head,
hydraulic slide and compression jaws can result in serious crush and cut
injuries.
- For use only with REHAU or REHAU-authorized accessories or
attachments. Although certain unauthorized accessories and attachments
may fit onto the power tool, their use may, in fact, be extremely dangerous
and result in personal injury and faulty joints, which can lead to leaking and
property damage.
- For proper installation, the expander head and compression jaws
must match the dimension of the RAUPEX PEXa pipe being installed.
Failure to mount the proper size expander head and compression jaws
before installing a fitting may be dangerous and also result in a faulty joint,
which can lead to leaking and property damage.
- For use only with RAUPEX PEXa pipe and the EVERLOC+ compres-
sion-sleeve fitting system. Other materials or fittings may crack or
otherwise fail, which could result in leaking and substantial property
damage.
- If your power tool or any part is damaged or does not function
properly, have it repaired by an authorized REHAU service center.
There are no user-authorized repairs for the battery, charger or power tool.
Do not use the power tool until the problem has been corrected.
- To reduce the risk of personal injury from accidental activation of the
power tool, always remove the battery pack before changing attach-
ments, inspecting, cleaning, lubricating or performing any other type
of maintenance, inspection, repair or cleaning.
- Do not operate the power tool while under the influence of any
substance (drug, alcohol, medication, etc.) that might impair vision,
balance, dexterity or judgment.
- Working with a power tool can be strenuous. The operator must be in
good physical condition. To reduce the risk of injury from loss of control, be
alert. Do not operate the power tool when tired. Take a break if you become
tired. Always hold the tool firmly while working as directed in the instruction
manual.
- Make sure you have good balance and secure footing at all times. Use
caution when working from a ladder or other elevated platform. Do not
overreach.

3. STANDARD KIT / ACCESSORIES

EVERLOC+ Power Tool Standard Kit
- EVERLOC+ power tool
- Expansion adapter
- 1/2, 3/4 and 1 in. EVERLOC+ expander heads (quick change)
- 1/2, 3/4 and 1 in. EVERLOC+ compression jaws
- DEWALT 12V Li-ion battery (DCB127) (2 batteries per kit)
®
- DEWALT 12V/20V Li-ion charger 120VAC (DCB107)
- DEWALT 12V/20V Li-ion Battery Charger Instruction Manual
- Pipe cutter
- Lubricant
- Cleaning brush
- Tool case
- Product Instruction Manual
Available Accessories
- 3/8 in. expander head (quick change)
- 3/8 in. compression jaws
- 5/8 in. expander head (quick change)
- 5/8 in. compression jaws
Spare, DEWALT 12V Li-ion Battery (DCB127)
Contact DEWALT to purchase this item from your most convenient retailer.
Spare, DEWALT 12V/20V Li-ion Charger 120VAC (DCB107)
Contact DEWALT Service at 1-800-433-9258 to purchase this item.
4
All manuals and user guides at all-guides.com
Pinching fingers or trapping other parts of your body in the expander head,
hydraulic slide or compression jaws can result in crush and cut injuries. To
reduce the risk of serious injury:
- Wrap the fingers of your trigger hand tightly around the control handle as
shown in this instruction manual. The power tool is designed for one-hand-
ed operation.
- Never grasp or support the power tool near the expander head, hydraulic
slide or compression jaws. Use only your index finger to trigger the tool.
Using other fingers to trigger the tool may cause you to lose control of the
power tool or cause other fingers to move toward the moving parts.
- Keep a secure grasp during work.
This EVERLOC+ power tool is approved for use only with REHAU expander
heads and compression jaws. Although certain unauthorized accessories and
attachments may fit onto the power tool, their use may, in fact, be extremely
dangerous and result in personal injury and faulty joints, leaking and property
damage.
To reduce the risk of fire, electric shock and other serious personal injury or
property damage, use the power tool only with specified battery. Recharge
the battery only with the chargers and in the manner specified in the
DEWALT instruction manual. Read and follow the important safety warnings
and instructions provided with your charger and battery.
NOTICE
For proper installation, the expander head and compression jaws must match
the dimension of the PEXa pipe. Failure to mount the proper size expander
head and compression jaws may result in faulty joints, leaking and property
damage

4. MAIN PARTS / SPECIFICATIONS

To reduce risk of fire and electric shock, never operate the tool in the rain or
otherwise in damp or wet environments. Keep the tool, battery and charger
away from moisture, extreme heat and harsh detergents or solvents.
Technical Data
Battery voltage
Battery
Charger
Approximate charging time 90 minutes
Tool and battery
operating temperature
Noise level
Vibration level
Weight
Charger operating
temperature
WARNING
WARNING
WARNING
WARNING
12V (Max)
DEWALT 12V Li-ion (DCB127)
DEWALT 12V/20V Li-ion (DCB107)
14°F to 104°F
(-10°C to 40°C)
< 75 dB (A) at 3 ft (1 m) distance
< 2.5 m/s²
(weighted eff. value of the
acceleration)
Approx. 5.1 lbs (2.3 kgs)
(basic tool with adapter and battery)
40°F to 104°F
(4.5°C to 40°C)