Before First Use - Espressione EM-1040 Manual De Instrucciones

h6. TEMPERATURE light:
This light indicates:
a) When your machine is ready to produce espresso, hot water or steam:
- Light flashes = the espresso, hot water or steam mode is in progress
- Light is solid = the espresso, hot water or steam mode is ready to dispense
b) That the tank is empty (flashes quickly)
c) That the rotating control button should be set to PENDING
(flashes quickly)
h7. START/STOP button
Turn the button to the right (I) to turn the machine on – (the TEMPERATURE light (h6) comes on straight
away) and to the left ( ) to switch off.

BEFORE FIRST USE

Open the machine and remove all the plastic bags, boxes and papers protecting the different parts.
Never leave the plastic bags in the reach of children.
Also remove any self-adhesive labels that may be on the product cover or any other information leaflets.
Remove detachable parts and clean in warm soapy water. Do the same with the other accessories.
Wipe the appliance body and staineless steel tray cover using a soft wet cloth.
IMPORTANT
Any action performed on the machine must be done with the power cord
disconnected. Never place parts or accessories in the dishwasher.
Only the glass coffee pot is compatible with the dishwasher.
Never immerse the appliance, power cord or plug in any liquid.
Ensure that all parts are completely dry before re-assembling.
Place the cup rest grill on the water drip tray and slide it into the housing.
Reposition the water tank by pushing it backwards toward the edge of the machine.
Return the filter holder into its compartment.
Position the coffee pot on the warming plate.
Filling the espresso water tank
To fill the tank:
Remove the water tank by pulling it forwards using the central handle (Fig.1) .
Fill the tank with fresh water without exceeding the maximum water level.
Return the tank into its housing by sliding it along the cup rest grill (Fig.2) .
Ensure that you have pushed it right to the end.
( ) during heating of your appliance
English
13