Controls; Heat Sensor; For Your Safety - Monogram ZVW1360 Serie Manual Del Propietário

CONTROLS

Throughout this manual, features and appearance may vary from your model.
1
DELAY OFF
HOLD 3 SEC
2
1. Rangehood Control Panel:
panel is located on the bottom of the canopy. The
function of each control pad is noted below.
2. Power:
On/Off switch for the fan. The fan can be
operated by pressing any of the fan setting pads.
Hold POWER pad for 3 seconds to activate Delay Off
feature, which automatically turns the fan off after 15
minutes. The indicator light above POWER will blink
on/off to indicate Delay Off feature is activated.
3. Fan Setting:
Speed control for fan. Fan speed is
powered by QuietBoost™ Technology. This unique
technology is designed to minimize ventilation noise
and enhance motor efficiency for a peacefully-quiet,
odor-free kitchen. Press LOW for LOW speed. MED
for MEDIUM speed and HIGH for HIGH speed. Press
and hold the HIGH pad for 3 seconds to activate
the BOOST speed that will run for 15 minutes. High
button LED will blink on/off to indicate Boost feature
is activated.

HEAT SENSOR

Your hood is equipped with a HEAT SENSOR thermostat.
This thermostat is a device that will turn on or speed up
the blower if it senses excessive heat above the cooking
surface.
If blower is Off - it turns blower On to BOOST speed.
If blower is On at a lower speed setting - it turns blower
up to BOOST speed.

FOR YOUR SAFETY

Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting means
to prevent power from being switched on accidentally.
49-2000705 Rev. 4
WIFI
PAIRING
3
The control
BOOST
HOLD 3 SEC
4
4. Light:
Controls the lights. Press the LIGHT pad to
turn the lights to the highest setting. Press the LIGHT
pad again to switch to medium brightness. Press the
LIGHT pad again to turn the lights to dim. Press the
LIGHT pad a fourth time to turn off the lights.
5. Chef Connect:
down for 3 seconds to activate the Bluetooth
Bluetooth ® pairing feature for use with other compatible
Chef Connect enabled products on a cooktop or range.
When the device is paired, the default sync settings will
be activated upon receiving a command from the range
or cooktop. To change the default sync setting, refer
to the Chef Connect section. See the Chef Connect
section for more details
6. Wi-Fi:
Hold down the LOW pad for 3 seconds to
initiate the Wi-Fi connection. The Wi-Fi indicator light
turns on when connected, see the Wi-Fi Connect
section for details.
When the temperature level drops to normal, the blower
will return to its original setting.
When the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a tag,
to the service panel.
HOLD 3 SEC
6
5
Hold the CHEF CONNECT pad
® . This is a
5