Product Overview; Technical Data - LUND 78890 Instrucciones Originales

All manuals and user guides at all-guides.com

PRODUCT OVERVIEW

The soldering iron and wood pyrography pen is a tool that can perform two tasks
depending on the attached tip. As a soldering iron it is designed for soldering
metal materials with tin-lead solders for soft soldering. As a pyrography pen it
is used to decorate wood by burning its top layer locally. The device is designed
for household use only and must not be used professionally, i.e. in workplaces
or for paid work. Proper, reliable and safe operation of the device depends on
appropriate use, that is why you should
Read and keep the entire manual before the fi rst use of the tool.
The supplier shall not be held liable for any damage or injury resulting from im-
proper use of the tool, failure to observe the safety regulations and recommen-
dations of this manual. Use of the tool for purposes other than those for which
it was intended shall cause the loss of the user's rights under the warranty and
incompliance with the sale agreement.
ACCESSORIES
The product is delivered complete, but requires certain preliminary actions de-
scribed in further sections of the manual. The following are supplied with the
product: tips, solder wire, alphanumeric template and a sheet metal base, which
allows putting the heated product aside safely.

TECHNICAL DATA

Parameter
Catalogue No.
Power supply voltage
Power frequency
Rated power
Tip temperature
Heating time
Weight
Insulation electrical protection class
GENERAL SAFETY CONDITIONS
Caution! Read all of the following instructions. Failure to do so may result in
electric shock, fi re, or personal injury.
FOLLOW THE INSTRUCTIONS BELOW
Do not use the product in an explosive environment containing fl ammable liquids,
gases, or vapours.
Before starting the product for the fi rst time, make sure that the product, its acces-
sories, and the power cord have not been damaged. If any damage is discovered,
it is not allowed to start working with the product. Any damaged components, in-
cluding the power cord, must be replaced at an authorized facility. It is not allowed
to repair the product on your own.
The product is intended for indoor use only. Do not expose the product to any
precipitation or moisture. If water and moisture enters the product, the risk of an
electric shock is signifi cantly increased. Do not immerse the product in water or
any other liquid.
Connect the product to the power network providing the voltages and frequencies
indicated on the nameplate of the unit, exclusively. The plug of the power cord
10
O R I G I N A L I N S T R U C T I O N S
GB
Units
[V~]
[Hz]
[W]
[ C]
O
[min]
[g]
Value
78890
230
50
30
400
5 - 10
50
I