RAD-320-V1.0-instr.pdf
instalLaTION
BELT CLIP
1. Place the clip,matching the
holes and screw it.
CHARGING THE BATTERY
Charge the battery during 8 continuous hours or until the LED in the
charging base.
C
1. Connect the micro USB cable into the micro USB connector Radio
M
2. Connect the other end to a USB port on your computer or through a
Y
USB eliminator into electric current.
CM
MY
CY
CMY
K
16
06/10/16
11:12 a.m.
When the battery is
running low, the LED
operation indicator turn
on red.