Bonnet Neve Shape Frozen Serie Instrucciones De Uso página 61

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Proceed with cleaning: to clean the area under
IT
the evaporator, with the aid of a suitable
recipient, slowly pour some hot water taking
FR
care not to splash the surrounding components.
The water must be poured from the rear side so
that as it flows, it moves towards the drainage
EN EN
holes of the tub. If necessary, repeat the
operation more times.
DE
To facilitate these operations and the collection
ES
of wash water, a drainage pipe has been
provided to convey the water used for internal
PT
cleaning, directly to the outside of the unit.
After carefully checking that the inside of the
cabinet is completely dry, restart the appliance
by re-energising the cabinet.
Allow a couple of hours before loading the
products back again.
N°DOC. UM000347 REV. "C" - 31/03/22
SHAPE FROZEN
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
Fig. 35
16/22