Ejecting Your Cloud Store; Blackmagic Cloud Store Setup; Home Screen - Blackmagic Design Cloud Store Manual De Instrucciones

Ejecting your Cloud Store

You can eject the Blackmagic Cloud Store the same way you would eject a USB drive on your
computer's operating system. For example, once you have started writing and reading files
on a Mac, an 'eject' icon will appear next to the Blackmagic Cloud Store's name in the Finder
sidebar. Simply click on the eject icon and your cloud store will be ejected. This makes sure no
new files are written and you can safely remove the drive.
If there are multiple users accessing the drive on your network and you need to power the
unit down, or disconnect from the network, it's important that each user ejects the Blackmagic
Cloud Store from their computer.

Blackmagic Cloud Store Setup

The Blackmagic Cloud Store Setup utility contains all the settings for your Blackmagic Cloud
Store including naming the unit and updating the internal software.
Download the latest Blackmagic Cloud Store software from the Blackmagic Design Support
Centre at: www.blackmagicdesign.com/support

Home Screen

The home screen is the primary page you will see when you launch the software. All connected
Blackmagic Cloud Store units on your network are accessible and if you have more than one
unit connected, you can select the desired unit by clicking on the left or right arrows.
The indicators at the bottom of the home screen display the total storage capacity, amount of
space used, the network connection status, plus the current maximum data rate.
The icons near the unit's name indicate when the unit is connected to your computer via
Ethernet or USB. Click on the settings icon to open the settings for your cloud store.
Blackmagic Cloud Store Setup 14