The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
Read all instructions. Failure to follow all instructions listed below may
result in hazardous radiation exposure, electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "tool" in all of the warnings listed below refers to your mains-operated (corded) tool or
battery-operated (cordless) tool.
The following labels are on your laser tool for your convenience and
safety. They indicate where the laser light is emitted by the tool.
ALWAYS BE AWARE of their location when using the tool.
Do not direct the laser beam at persons or animals and do not stare into
the laser beam yourself. This tool produces laser class 2 laser radiation and
complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 56, dated May 8, 2019. This can lead to persons being blinded.
DO NOT remove or deface any warning or caution labels. Removing labels
increases the risk of exposure to laser radiation.
It is the user's responsibility to periodically check the accuracy of the
laser level as work progresses. Always check the accuracy of the laser
level after it has been dropped or subject to extreme temperatures and temperature variations.
If glass light house breaks when dropped, broken glass can cause
laceration hazard and unit to lose its IP rating. Contact customer service
immediately.
GRL4000-90CHVG 10-21.indd 8
Safety Symbols
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
Read manual symbol - Alerts user to read manual.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
This symbol designates that this laser leveling tool complies with Part
15 of the FCC Rules.
General Safety Rules
-8-
10/20/21 3:23 PM