After Measurement - AND PREMIUM UB-543 Manual De Instrucciones

Using the Monitor
7. Selecting the C.P.G. and my C.P.G.
q You can select an indicator either the C.P.G. function or my C.P.G. .
q Preset a proper posture (wrist angle) in memory if you use the my C.P.G. .
1. Adjust and keep the height of the blood pressure monitor to the same level as your heart using your wrist
angle.
2. Select an indicator using the
Indicator ... The C.P.G. function is used. (my C.P.G. function: OFF) Data of my C.P.G. is deleted.
Proceed to step 3.
Indicator ... my C.P.G. function is
Proceed to step 3.
3. Press the START button to turn off the device.
Note: When removing the batteries, preset parameters (of clock, user and my C.P.G.) are reset.
8. Measurement
During measurement, it is normal for the cuff to feel very tight.

9. After Measurement

While readings are displayed, if you press the START button to turn the device off, new readings are stored in memory.
While readings are displayed, if you press the
Remove the cuff and record your data.
Notes: The device is provided with an automatic power shut-off function which stores the current data in the memory and turns the
device off automatically one minute after measurement. Allow at least three minutes between measurements on the same person.
E-13
button.
ON and the current angle is stored when switched to the indicator .
button to turn the device off, new readings are not stored.