Recalling The Memory Data - AND PREMIUM UB-543 Manual De Instrucciones

Recalling the Memory Data

Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off. The
average of all measurements and the number of data
are displayed. If no data, "0" is displayed. Press the
START button to turn the device off.
2. Use the following buttons to display data
(of number and measurement data).
q Select a user from user and user using the
button. The device displays the average of all
measurements and the number of data are displayed.
q Pressing the
as follows:
Average data of all AM (morning) measurements
n
taken between 4:00 and 9:59. In the example, If no
data, -- is displayed.
Average data of all PM (evening) measurements
n
taken between 18:00 and 1:59.
Data (of number and measurement data). The
n
device displays in order from most recent data.
The date and time are displayed alternately while
displaying the measurement data.
In the example: No.30 & data
No.01 & data.
E-15
button each time , the device displays
No.29 & data
Memory mode
User selection
or
Average of all the data
Number of all data
Average for AM data
SET
Number of AM data
Average for PM data
Number of PM data
Most recent data
Last data (Oldest)
...
Turn off
button
button
Example: user
button
AM indicator
button
PM indicator
button
Ex.: No.30
Date
Time
button
3 seconds
button
Date
Time
button
3 seconds
Turn off